Hearback Headphone Mix System

Our Hear Back Headphone Mix system consists of a Hub and personal Mixers connected using standard CAT5E cables. The Hub supplies signal and power to a maximum of eight Mixers. That's one for you and everybody in the band. Now each performer can get their own mix going, very simply. Once you use it you'll wonder how you did without one for so long.

• Excellent audio fidelity
• Built-in DSP Limiter
• Very long digital lines possible without loss of audio quality
• Audio inputs ADAT, analog, and the HearBus are switch selectable from the front panel.
• Local control of up to ten channels of audio (8 inputs plus a stereo Aux input) Master Volume (controls the level to the headphones, line outs and the Aux input to the line outputs)
• Built-in DSP Limiter (designed as a "brick wall" limiter for hearing protection).
• Headphone amplifier fault indicator in case of over temperature, or a short, the red LED comes on to alert the user something is a problem.


• A second visual trouble shooting aid for the user is the Bus status indicator
• Link Indicators - Whenever two pairs of mono inputs are linked for stereo operation the link LED is illuminated
• Standard CAT5E power and signal Connection, a simple, non-obtrusive way to connect eight channels of audio. The Cable is held in place with a "built-in cable strain relief"
• Balanced Line-Outs, Mono/Stereo
• Stereo AUX In
• Built-in Mic Stand Mount
• High Power - Low Distortion Headphone Amplifiers
• One of the industry's most powerful headphone amplifiers